PA 2100 SD
Compact Amplifiers

 
Special features

  • 2-channel digital amplifier

  • Minimale dimension

  • 2 × 100 watts or 1 × 200 watts

  • Remote controllable

  • Automatic switch-ON

  • VCA input separated for each channel

  • Symmetric inputs

  • Switchable high-pass filter

Fields of application
  • Home audio
  • Media rooms
  • Conference rooms
  • Shops, sales rooms
  • Gastronomy
  • Clubs, discotheques
  • Concert halls, theatres
  • Churches
Description

The PA 2100 SD is a compact, remote controllable 2-channel digital amplifier designed for use in AV systems, multi-room systems and multi-channel PA systems.

The PA 2100 SD has compact dimensions and an output power of 2 × 100 watts at 4 ohms and/or 1 × 200 watts at 2 ohms. In bridge mode, it delivers output power of 1 × 200 watts at 8 ohms and/or 200 watts at 4 ohms, guaranteeing excellent sound quality at all times.

The integrated peak limiters prevent distortion if the amplifier is overdriven. To enable remote control, the amplifier is equipped with an automatic switch-on function, an ON/OFF contact and VCA inputs for external volume control.

The amplifiers can be controlled individually or in groups using the WP-V and RP-V volume controllers or the DV module and UP/DOWN contacts. This means that the amplifier does not have to be manually operated, making it ideal for use in combination with built-in speakers in difficult-to-reach locations such as suspended ceilings.

Up to 4 PA 2100 SD amplifiers can be mounted in 19” racks in a single height unit (in PA-T 1U). Input sensitivity can be switched from -6 dBu (for connecting computers, MP3 players etc.) to +4 dBu.
Technical data
Inputs 2 × line IN Cinch asym., screw-type terminals, pluggable, symmetric
Nom. input - 6 dBU/+ 4 dBU switchable
Max. input + 22 dBU
Input impedance 20 kohms
Load impedance ≥ 2 ohms / bridge ≥ 4 ohms
Outputs 2 × speaker out up to 2 × 2.5 mm², (Screw-type terminals, pluggable)
Output power
4 ohms
8 ohms
2 ohms
Bridge
2 × 100 watts
2 × 60 watts
2 × 140 watts
1 × 200 watts (4 or 8 ohms)
Frequency range 30 Hz – 25 kHz (- 3 dB)
THD < 0,05 % (1 kHz, 3 dB at full power)
Dynamic range > 100 dB
Switchablehigh-pass filter 100 Hz (12 dB/Oct) for satellite speaker switchable per channel
Automatic switch on ON if NF signal is present, OFF (stand-by) after more than approx. 15 min. without signal AUTO/STEADY ON selectable per DIP-switch
Controls Gain controls and LED ON at front, DIP-switch at back: Gain, HP Filter, Auto/Steady-ON, Bridge, Ground-Lift
Additional connectors VCA inputs 0 – 10 V for each channel (also for DV-modules),Floating fault contact (N/O), Standby contact (N/O or N/C)
Cooling Silent running, regulated fans, air flow from front to back
Protective circuits Short circuit and overtemperature protection, inrush current limiter. Peak limiter, current limiter and power limiter for each speaker output
Power supply 230 VAC
Mains connector IEC connector
Power consumption
Standby
Idle
1/8th power
Maximum

1 watts
8 watts
40 watts
100 watts
Dimensions
(W × H × D)
¼ 19", 1U ,110 × 43 × 220 mm
Fixing Mounting bracket (included in delivery)
Weight 1.7 kg
Warrenty 5 years
Downloads
Data sheet (PDF)
LB Datasheet PA 2100 SD_2021.pdf (1.25 MB)
 
Accessories

WP-V
RP-V

Wall panel

(volume + mute)

Rack panel

(volume + mute)

DV Module

Digital volume control

via UP/DOWN contact

PA-T 100

100 V transformer

100 watts toroidal core

PA-T 1 U

Rack cradle 19", 1 HE für

4 × PA 2100 SD or PA-T 100