Skip to main content

DE Plan 200 ST inside

Stereo Speaker for Invisible Integration into Furniture and Wall Panels

 
Key Features
  • Invisible stereo flat transducer

  • 180° nominal dispersion

  • Very linear frequency range

  • Small mounting dimension: (300 × 240 mm)

  • 2 × 3“ woofers + 2 × 1” high frequency drivers

  • 2 × 60 watts power capacity, 2 × 8 ohms

Fields of Application
  • Exhibitions, trade fairs
  • Gastronomy, hotels
  • Home audio
  • Museums
  • Surround systems
  • Sales rooms
Description

The DE Plan 200 ST inside® is a special version of DE Plan 200 ST designed to be invisibly installed in furniture and wall panels. The speaker is glued onto the backside of furniture or panels made of wood, MDF or similar materials and directly excites through these surfaces. To do this, the recessed mounting area is milled into the rear surface to a wall thickness of 3 mm. The surface is activated without an intermediate membrane, which makes DE Plan 200 ST inside extremely efficient and gives it an extensive, linear frequency range.

de:shape: the membrane of the DE Plan 200 ST inside has an optimized contour with a calculated distribution of distance between the edge and the high frequency driver (patent pending). This results in unprecedented audio performance and extremely accurate sound reproduction.

The elaborately tuned crossover ensures a warm, transparent acoustic pattern. The DE Plan 200 ST is ideally suited to small rooms or zones where only one speaker is required. A wide dispersion angle of 180° ensures that sound is distributed homogenously throughout the room.

The reproduction characteristics depend very much on the material in which the speakers are installed and the acoustics of each room. As a result, our system controllers, DSP power amplifiers or at least a multiband equalizer should always be used to achieve the best sound pattern

 

Technical Data
Principle

2-way stereo flat transducer

Components

2 × 3” woofers + 2 × 1” high frequency drivers

Frequency range
90 Hz – 20 kHz (mounted on a MDF panel with 3 mm thickness in front of the transducer)
Impedance
2 × 8 Ohm
Power capacity
2 × 30 watts RMS, 2 × 60 watts program
Sensitivity

79 dB (1 W @ 1 m), depending on the mounting materials

Maximum SPL

97 dB @ 1 m

Nominal dispersion
180°
Installation depth
72 mm
Recess size
304 × 244 mm, remaining wall thickness in front of the speaker: 3 mm
Weight
2,7 kg
Connectors
Screw-type terminals, pluggable
Warranty
5 years
 
ModelVersion

DE Plan 200 ST inside

Complete with 2C adhesive

Accessories

EG Plan 200

Einbaugehäuse Kunststoff Abm. 400 × 350 × 100 mm