Multichannel amplifier with 8 x 4 DSP-Matrix
Three models:
• PA 4400 DSC with 8 x line IN symmetrical
• PA 4400 DSC CINCH with 8 x line IN cinch asymmetrical
• PA 4400 DSC DANTE with Dante interface4 x 400 watts at 2 – 8 ohms, 2 x 800 watts at 4 – 16 ohms
8 x line IN, 4 x speaker OUT
Second slot for additional input module
Control via Ethernet
Speaker presets for all LB Loudspeakers
Multiband limiter for volume limitation
VCA inputs per channel
Switchable Automatic On/Off per channel
On/Off- and Fault contact
Switchable input Sensitivity +4/-6 dBU per channel
Silent running regulated fans
- Switchable Ground Lift per input channel pair
- 1U chassis, installation depth only 348 mm
Optional:
• 8xIN-SYM input module 8 x line IN symmetrical
• 8xIN-CINCH input module 8 x line IN asymmetrical
• DANTE 8x8 Dante Interface
• 100 V transformer
• Volume control (wall-panel WP-V or rack-panel RP-V)
• DV module for volume control via Up/Down contacts
- Home audio
- Media rooms
- Conference rooms
- Shops, sales rooms
- Gastronomy
- Clubs, discotheques
- Concert halls, theatres
- Churches
Description
The PA 4400 DSC is a sophisticated, class-D power amplifier with four output channels and integrated 8 x 4 DSP matrix. The power amplifier has an output rating of 4 x 400 watts at 2 - 8 ohms or 2 x 800 watts at 4 - 16 ohms in bridge mode. The amplifier is controlled over Ethernet using our LB CONTROL app or network commands. By selecting the appropriate speaker presets in the outputs, all of our speakers can be powered with maximum audio performance. With the multiband limiters available in the speaker presets the maximum volume can easily be limited without sound impairment. The PA 4400 DSC circuits are designed to ensure outstanding sound quality and reliability with minimum heat build-up. The generously proportioned, high-capacity power supply together with our processor-controlled class-D power amplifier modules guarantee outstanding efficiency levels and enormous power reserves. Equipped with a second input module, the amplifier can process both analog and digital signal sources.
The input Sensitivity is switchable for each channel, as well as a ground lift for each channel pair. An automatic On/Off function (switchable for each channel) automatically switches inactive amplifier channels to an energy-saving Sleep mode. In addition to the 8 x 4 mixer matrix and the speaker presets, the DSP also offers ten parametric filters, delay up to 100 ms plus Peak and RMS limiters for every input and output. We prepare project-specific presets on request. To enable remote control, the amplifiers are equipped with an On/Off contact and VCA inputs for each channel. For external volume control use our WP-V and RP-V volume controllers or the DV module with Up/Down contacts.
Any fault in the power amplifier channels is signaled via the isolated fault contact.
Models
8 x Line In Cinch
Downloads
Technical data
Accessories
8-channel input module for the PA series / PA DSC series with symmetrical line inputs. The module features GROUND LIFT dip switches for each channel pair.
8-channel input module for the PA series / PA DSC series with asymmetrical cinch inputs. The module features GROUND LIFT dip switches for each channel pair.
8-channel Dante input module for the PA series / PA DSC series. The Dante interface features two RJ45 terminals for audio over Ethernet (primary/secondary).
