Skip to main content

PA-S 230
Compact Amplifiers
new

 
Special features
  • Compact 2-Channel amplifier

  • Output power 2 × 30 watts at 4-8 ohms

  • 2 × Line In Cinch

  • Auto-on/off

  • Ext. ON/OFF contact

  • Switchable Ground Lift

  • Fanless

  • Chassis ¼ 19“, 1 U

Fields of application
  • Home audio
  • Media rooms
  • Conference rooms
  • Shops, sales rooms
  • Gastronomy
Description

The PA-S 230 is a compact 2-Channel power amplifier with automatic switch-on (Auto-ON/OFF) for use as zone amplifiers in multiroom systems and in multichannel systems. With minimal dimensions, the PA-S 230 delivers an output power of 2 × 30 watts at 4 - 8 ohms. The amplifier has an automatic switch-on (Auto-ON/OFF) and switches to an energy-saving sleep mode if there is no signal for a long time. The amplifier can be completely switched on and off via the switching contact on the rear (EXT. ON/OFF). This allows the PA-S 230 to be used even in inaccessible places, for example in suspended ceilings in combination with built-in speakers, as operation of the device is not necessary. In the PA-T 1 U rack cradle, up to four PA-S 230 can be installed in a 1U 19“ rack.

Technical data
Inputs 2 × line IN Cinch
Nom. input level 0 dBU
Input impedance 20 kohms
Load impedance ≥ 4 ohms
Outputs 2 × Speaker out up to 2 × 2.5 mm², (Screw-type terminals, pluggable)
Output power
2 ohms
4 ohms
8 ohms

-
2 × 30 watts
2 × 30 watts
Frequency range 15 Hz – 22 kHz
THD < 0,05 % (1 kHz, 3 dB below full power)
Dynamic range > 95 dB
Display LED for ON/STANDBY
Controls Power switch at front. At back VOLUME control, DIP switches for AUTO ON/STEADY ON, GROUND/LIFT
Additional connectors ON/OFF contact N/C
Cooling Fanless
Protective circuits Peak limiter, power limiter, short circuit and overtemperature protection
Power supply 90 up to 260 VAC
Mains connector IEC connector
Power consumption
Standby
All channels SLEEP
All channels active
1/8 Nominal power
Max. average consum.
Peak power

< 0,5 watts
2.4 watts
4.1 watts
12 watts
25 watts
70 watts
Dimensions
(W × H × D)

¼ 19", 1U ,110 × 42 × 233 mm
Weight 1.1 kg
Warranty 5 years
Downloads
Data sheet (PDF)
Manual
 
ModelVersion
PA-S 230
Order No.: 3005-0016
2-Channel amplifier with 2 × Line In Cinch
Accessories
MP-PA-S
Order No.: 3005-0030

Mounting plate for PA-S Series

PA-T 1 U
Order No.: 3109-0005

Rack cradle 19“, 1 U for up to 4 x PA-S 230 or PA-T 2050